Text Us +1 773-430-6136
Description
The Shure ADX2FD/K11N=-G57 Handheld Wireless Microphone Transmitter compatible with Axient Digital Wireless Systems Nickel - G57 (470-608 MHz). ADX2FD/K11 features the prized combination of full lows, clear mids and high-end of the KSM11 Cardioid Condenser Microphone. Combined with ADX transmitters this combination sets the stage for exceptional performance. Frequency Diversity with wide tuning up to 184 MHz, interference protection, advanced rechargeability, streamlined design, and ShowLink remote control for real-time parameter adjustments right from the booth.
External contacts for docked charging with optional fully covered radome, Diversity ShowLink enabled for remote transmitter control and automatic interference avoidance, Two transmission, modes: Standard for optimal coverage and new High Density for maximum system channel count and robust coverage Encryption-enabled, secure transmission.
Why We Like This
This handheld transmitter combines the clarity of the KSM11 condenser capsule with Frequency Diversity for exceptional RF stability. It’s built for mission-critical environments where consistent performance and remote control flexibility are essential.
FAQs
Q: What makes the ADX2FD different from the standard ADX2?
A: It features Frequency Diversity, allowing simultaneous transmission on two RF carriers for improved signal reliability.
Q: What capsule is included with this transmitter?
A: It includes the KSM11 cardioid condenser capsule.
Q: What wireless system is it compatible with?
A: It is designed for use with Shure Axient Digital wireless systems.
Q: Does it support remote control?
A: Yes, ShowLink technology enables real-time remote adjustments and automatic interference avoidance.
Based in Chicago, IL, Gear Club Direct supports musicians, DJs, and creators every day with reliable gear and expert service.
Tech Specs
Housing Material: |
Cast Aluminum |
Gain Offset Range: |
-12 to 21 dB (in 3 dB steps) |
Frequency Range: |
G57: 470-608MHz |
Battery: |
SB920A Rechargeable Lithium-Ion |
Battery Run Time @10 mW: |
Single-Carrier Mode: up to 9 hours; Frequency Diversity: up to 6.5 hours |
Configuration: |
Unbalanced |
Maximum Input Level: |
145 dB SPL, Typical (SM58) (1 kHz at 1% THD) |
Antenna Type: |
Integrated Dual-Band Helical |
Occupied Bandwidth: |
<200 kHz |
Channel-to-Channel Spacing: |
Standard Mode: 350 kHz; High-Density Mode: 125 kHz |
Modulation Type: |
Shure Axient Digital Proprietary |
Power: |
Single Carrier Mode: 2 mW, 10 mW, 20 mW, 50 mW; Frequency Diversity Mode: 2 x 20 mW |
Specific Absorption Rate (SAR): |
<0.21 W/kg |
Network Type: |
IEEE 802.15.4 |
ShowLink Antenna Type: |
ZigBee Dual Conformal |
ShowLink Frequency Range: |
2.40 to 2.4835 GHz (24 Channels) |
RF Output Power Varies By Region: |
10 dBm (ERP) |
Battery Info: |
Required, Included |
Battery Material: |
Lithium ion |
Battery Type: |
Non-universal |
Battery Quantity: |
1 |
Dimensions (L x Dia.): |
10 x 2" (254 x 51mm) |
KSM11 Housing Material: |
Aluminum and Steel Grille |
Type: |
Electret Condenser |
Polar Pattern: |
Cardioid |
Frequency Response: |
50 to 20,000 Hz |
Output Impedance (1 kHz): |
250 Ohm with 5 VDC |
Sensitivity: |
-46.5 dBV/Pa (At 1 kHz, open circuit voltage) |
Maximum SPL with 5 VDC: |
151 dB SPL |
Signal-to-Noise Ratio: |
71.5 dB |
Dynamic Range with 5 VDC: |
128.5 dB |
Clipping Level with 5 VDC: |
10 dBV |
Self Noise: |
22.5 dB SPL (Typical, equivalent SPL, A-weighted) |
Polarity: |
Positive pressure on diaphragm produces positive voltage into transmitter with respect to ground |
Power Requirements: |
5 Volt Bias from Shure Transmitter |
Dimensions (Dia. x H): |
1.92 x 3.0" (48.7 x 76.3mm) |
KSM11 Weight: |
5.23 oz (150g) |
Delivery & Returns
At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.
The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE
