CDi 4|1200BL

Analog + BLU link input, 4 channel, 1200W per output channel

The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost.  Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|1200BL offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.  Designed for ease-of-use in a variety of applications, the 4|1200BL is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.  The 4|1200BL also comes with BLU link, adding the ability to send and receive channels over HARMAN’s digital audio BUS. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

Feature Comparison

CDi DriveCore Model	Channels	Network Control	DSP	Control Port	BLU link
2|300	2
2|300BL	2
4|300	4
4|300BL	4
2|600	2
2|600BL	2
4|600	4
4|600BL	4
2|1200	2
2|1200BL	2
4|1200	4
4|1200BL	4

 

Output Power: Dual Mode - All Channels Driven

CDi DriveCore Model	Channels	2Ω	4Ω	8Ω	16Ω	70Vrms	100Vrms
2|300 / 2|300BL	2	150W	300W	300W	150W	300W	300W
4|300 / 4|300BL	4	150W	300W	300W	150W	300W	300W
2|600 / 2|600BL	2	300W	600W	600W	300W	600W	600W
4|600 / 4|600BL	4	300W	600W	600W	300W	600W	600W
2|1200 / 2|1200BL	2	850W	1200W	1200W	600W	1200W	1200W
4|1200 / 4|1200BL	4	850W	1200W	1200W	600W	1200W	1200W

Minimum Guaranteed Power (1kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120 - 240Vrms - 50/60Hz)

 

Output Power: Bridge Mono Mode - All Channels Driven

CDi DriveCore Model	4Ω	8Ω	16Ω	140Vrms	200Vrms
2|300 / 2|300BL	300W	600W	600W	600W	600W
4|300 / 4|300BL	300W	600W	600W	600W	600W
2|600 / 2|600BL	600W	1200W	1200W	1200W	1200W
4|600 / 4|600BL	600W	1200W	1200W	1200W	1200W
2|1200 / 2|1200BL	1200W	2400W	2400W	2400W	2400W
4|1200 / 4|1200BL	1200W	2400W	2400W	2400W	2400W

Minimum Guaranteed Power (1kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120 - 240Vrms - 50/60Hz)

Recommended for: Installed Sound.

Specifications

BLU link
Channels	4
Sensitivity (for full rated power at 8 ohms)	0.7V RMS
Rated Power Output (per channel @ 4 ohms)	1200W
Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms)	> 104dB
THD (full rated power, 20 Hz - 20 kHz)	0.35%
Damping Factor (20 Hz to 100 Hz)	> 1000
Frequency Response (8Ω, 20 Hz - 20 kHz)	+/-0.25dB
Crosstalk (below rated power) 20 Hz to 1 kHz	> 80dB
Input Impedance (nominally balanced, nominally unbalanced)	20 kΩ balanced, 10 kΩ unblanced
Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion)	19 x 3.5 x 14.71
Weight	20.1 lbs (9.12 kg)
Power Supply Connector	"20A IEC connector, 100 – 240V"