Description

The Trace Elliot TE-1200 bass head combines four-band active EQ, separate low- and high-band compressors, and Pre-Shape voicing with flexible live and recording connections. Its balanced DI offers pre/post-EQ selection and ground lift, while the USB output sends the processed preamp signal to a computer. A buffered effects loop, tuner output, and power-amp linking connections support a larger rig. The supplied specification rates output at 1100W RMS into 4 ohms and 835W RMS into 8 ohms at 1% THD+N, with a four-ohm minimum load. A four-button MIDI footswitch, 25-foot cable, bag, and rack kit are included.

Features

Four-band active EQ
Separate low/high compressors
Pre-Shape control
Balanced pre/post DI
USB recording output
Buffered effects loop
Footswitch/cable/bag/rack kit included

Why We Like This

Separate compression bands let low notes be controlled without forcing the same behavior on the upper register. Included rack and carry accessories also make it easier to choose how the head travels.

FAQs

Q: Does its USB port play audio back from the computer?
A: The documented USB function is a processed preamp recording output and has no input capability.

Q: Should I use a guitar cable to the cabinet?
A: Use a suitable speaker cable for an amplifier’s powered speaker output.

Q: Can the direct output power a passive speaker?
A: No. A direct output feeds compatible recording or PA equipment rather than supplying speaker power.

Based in Chicago, IL, Gear Club Direct supports musicians, integrators, and creators every day with reliable gear and expert service.

Tech Specs

Compression:	Separate low-band and high-band compressors with adjustable thresholds and switchable activation.
Dimensions (W × D × H):	12.0 × 12.0 × 3.62 inches (305 × 305 × 91.9 mm).
Direct Output:	Balanced output with switchable pre/post-EQ routing and ground lift; pin 1 ground, pin 2 positive signal, pin 3 negative signal.
Effects Loop:	Buffered send/return loop with a level switch and footswitchable activation.
Equalization:	Four-band active EQ with center frequencies of 70 Hz, 600 Hz, 2 kHz, and 5 kHz.
Headphone Output:	¼-inch preamp output with automatic disconnection of the signal to the power amp when a plug is inserted.
Included Accessories:	Four-button MIDI footswitch, 25-foot footswitch cable, padded gig bag, and 1.5U rackmount kit.
Input Impedance:	Greater than 10 megohms.
MIDI Connections:	MIDI Out and an eight-pin footswitch/MIDI input that also accepts a standard five-pin MIDI cable.
MIDI Control:	Responds on MIDI channel 1 to control messages for the effects loop, Pre-Shape, compressor, mute, and EQ-before-compressor selection.
Mains Voltage:	120 VAC or 220–240 VAC, 50/60 Hz, with an AC voltage selector.
Minimum Speaker Load:	4 ohms.
Nominal Input Sensitivity:	1.4V RMS with gain at 12 o’clock; 70mV RMS with gain at maximum. Both values are specified with EQ controls at 12 o’clock, compressors off, and Pre-Shape off.
Output Configuration:	Bridged output.
Power Output into 4 Ohms:	1,100W RMS at 1% THD+N.
Power Output into 8 Ohms:	835W RMS at 1% THD+N.
Preamp Output / Power Amp Input:	1V RMS master/slave loop located after the output-level control.
Product Type:	Bass Amp Head
Protection:	Over-temperature, over-current, clip limiting, short-circuit, and DC-output protection.
Speaker Outputs:	Two parallel Neutrik combination Speakon/¼-inch phone connectors.
Tuner Output:	Buffered, unprocessed ¼-inch output that remains active when muted.
USB Recording Output:	Processed preamp master-output signal for recording to a computer or digital audio workstation; no input capability.

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE