null
Tannoy

Tannoy TA-CMS403ICTE 4" Full Range Directional Ceiling Loudspeaker with ICT Driver for Installation Applications (Blind Mount) - Sold in Pairs

Write a Review
$189.00
SKU:
TA-CMS403ICTE
UPC:
4033653104173
MPN:
4033653104173
Minimum Purchase:
2 units
Shipping:
Free Shipping
Current Stock:

Description

Tannoy TA-CMS403ICTE 4" Full Range Directional Ceiling Loudspeaker with ICT Driver for Installation Applications (Blind Mount) - Sold in Pairs

The product is sold in pairs, but the price is listed per individual item

Incorporating a newly refined version of Tannoy’s proprietary ICT point-source driver, the CMS 403ICTe has been re-engineered for optimum compatibility with Lab Gruppen commercial amplifiers while also delivering consistent broadband directivity, precise articulation for voice and music, and exceptional long-term reliability.

The point source configuration of the Tannoy ICT driver’s mid-bass and tweeter sections ensures a wide and controlled dispersion for optimum coverage, avoiding significant energy losses in the vertical plane at the crossover frequency, a flaw inherent in typical two-way designs. The ICT (Inductive Coupling Technology) drive unit also addresses two common component failures in background music systems: the tweeter and the crossover. Use of wireless electromagnetic coupling to drive the tweeter means that no crossover is required, making the ICT drive unit exceptionally reliable and ideal for applications where constant heavy usage is the norm. The mineral-loaded polypropylene cone material and nitrile rubber surround further enhance durability and long-term reliability.

Specifically designed for fast, simple and cost effective installation in new and existing buildings, the CMS 403ICTe features a self-aligning clamp system. The “eyeball” design allows the driver to be entirely angled towards the listener within the fixed ceiling-mounting ring.

The CMS 403ICTe utilizes a 16 ohm driver, making it ideal for use in high performance low-impedance systems (with optimized performance when used in conjunction with Lab.gruppen LUCIA amplifiers). A low-insertion loss 30 W transformer is included, with convenient front switching for taps at 30 W, 15 W and 7.5 W, with an additional 3.75 W tap for traditional constant voltage systems.

The CMS 403ICTe is supplied with an integral back-can, ready to install as a single unit. The removable locking connector has screw terminals for secure wire termination and loop-thru facility. All models are supplied with two tile support rails and one C-ring; a plaster mud ring is available as an optional accessory.

Tannoy CMS-403ICT-E Specifications:

  • Newly refined 100 mm (4.0”) ICT transducer for greater durability and longevity
  • High power & high sensitivity with extended frequency response
  • Wide, controlled, constant directivity dispersion for optimum coverage
  • Does not suffer from energy loss in the vertical plane at crossover as with two-way discrete designs
  • Low insertion-loss, 30 W line transformer for a more powerful and dynamic performance
  • Convenient front-tapping switch for settings
  • Adjustable tilt angle with 360° rotation to accomodate difficult loudspeaker placements
  • Three-clamp, self-aligning mounting system
  • UV resistant baffle and grille
  • Packaged with classic grille, tile rails and C-ring for quick and easy installation and simple stocking logistics

Tannoy CMS-403ICT-E Technical Specifications:

  • Performance:
    • Frequency Response (-3 dB) (1): 110 Hz - 22 kHz
    • Frequency Range (-10 dB) (1): 80 Hz - 24 kHz
    • System Sensitivity (1 W @ 1 m) (2): 88 dB (1 W = 4 V for 16 Ohms)
    • Nominal Coverage Angle: 90 degrees conical
    • Coverage Angle (1 kHz to 6 kHz): 120 degrees conical\
    • Directivity Factor (Q): 5.26 averaged 1 kHz to 6 kHz
    • Power Handling (3):
      • Average: 50 W
      • Programme: 100 W
      • Peak: 200 W
    • Recommended Amplifier Power: 100 W @ 16 Ohms
    • Nominal Impedance (Lo, Z): 16 Ohms
    • Rated Maximum SPL (2):
      • Average: 105 dB
      • Peak: 111 dB
    • Transformer Taps (via front rotary switch):
      • 70 V: 30 W (165 Ohms) / 15 W (330 Ohms) / 7.5 W (660 Ohms) / 3.75 W (1320 Ohms) / OFF & low impedance operation
      • 100 V: 30 W (330 Ohms) / 15 W (660 Ohms) / 7.5 W (1320 Ohms) / OFF & low impedance operation
    • Crossover: 7 kHz inductively coupled
  • Transducers:
    • Low Frequency: 100 mm (4.00") mineral loaded polypropylene
    • High Frequency: 19 mm (0.75"?) ICT™ aluminium dome
  • Physical:
    • Enclosure:
      • Back Can: Reflex loaded UL 94 V-0 rated ABS
      • Baffle: Reflex loaded UL 94 V-0 rated ABS
      • Grille: Steel, with weather resistant coating
    • Safety Features: Safety ring located at rear of enclosure for load bearing safety bond
    • Clamping Design:
    • Min / Max Clamping Range: 0.0 mm (0.00") / 20.0 mm (0.79")
    • Recommended Clamp Torque: 1.5 Nm
    • Connectors: Removable locking connector with screw terminals with "loop through" facility
    • Dimensions:
      • Bezel diameter: 205.0 mm (8.07")
      • Front of ceiling to rear of pod: 147.6 mm (5.81")
    • Hole Cutout Diameter: 187 mm (7.36")
    • Net Weight (each): 2.86 kg (6.31 lbs)
    • Included Accessories:
      • C Ring
      • Tile bridge
      • Paint mask
      • Cutout template
      • Grille
    • Optional Accessories: Plaster (mud) ring

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final. 

 

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange.  READ MORE

Customer Reviews