Speaker Stands and Accessories

Placing studio monitor speakers directly on a hard surface such as a desk or unpadded stand can result in vibration and surface coupling that affects the sound of your speakers. PreSonus® ISPD-4...

The A 1360 accessory is an adapter designed for surface mount installation of the PL 60 ceiling speaker. It is made of plastic UL94 V0 with rear plate in metal, providing an excellent aesthetic and...

Round Black Grille for Control 426C/T, 426LP, & 424LP Features: Round replacement grille for Control 426C/T, 426LP, and 424LP speakers Clean aesthetic, perfect for professional spaces Full-face...

This is the Room Mode Calibration Kit for the JBL LSR6300 series of studio monitor speakers, developed in support of the proprietary RMC technology ,which allows the user to fine tune the speakers...

Audio professionals looking to ground-stack a SRX900 Series line array will need the JBL Base Plate for SRX906LA Arrays. The base plate is a universal adapter frame that allows up to six SRX906LA...

The JBL VRX-AF Array Frame has been precisely engineered to work together with the VRX932LA and VRX918S speakers as a system. The system includes the center frame, two side arms, four quick-release...

Suspension Kit for VLA-C Arrays with 2 pcs VLA-C-SB2 Suspension Bars (for top and bottom of array) and 3 pcs Forged-Shoulder Eye Bolts. See user’s guide for instructions and limitations.  Black only.

The JBL Professional MTU-4-WH Bracket is designed to mount your AC2212/xx speaker on a wall or ceiling, and then fit it at angle you need. U-Bracket for AC2212/xx Mounting Hardware...

The JBL WB8 is a rough-in frame designed to fix the wall location for installation of a Control® 128W speaker (sold separately) to studs in new construction, prior to wallboard installation.

The JBL WB6 is a rough-in frame designed to fix the wall location for installation of a JBL Control 126W speaker to studs in new construction. Features Compatible with JBL Control 126W and

The black Reducer Flange from K&M is designed for all K&M speaker stands with a 35mm tube diameter. The bolt is threaded M10 x 12mm and comes with a large ergonomic knob.

Those who do not place their studio monitors on a table surface, but use dedicated stands and mounts for monitoring in their own studio, are already doing a lot of things correct. Nevertheless,...