Text Us +1 773-430-6136
Description
The ultimate high-tier, high channel count wireless receiver, Shure ANX4 receives up to 16 channels of Shure Axient Digital or 24 channels of Shure ULX-D wireless audio in a single rack space. Delivering maximum flexibility, ANX4 does not ship preconfigured with active wireless channels, allowing you the opportunity to purchase channels in single- and four-channel increments and activate the exact number of channels you need. Licenses can be activated in one ANX4 and later removed and activated in a different ANX4 as needs change. ANX4 channel licenses are perpetual licenses, not subscription-based licenses, and can be purchased through the same authorized suppliers ANX4 hardware units are sold (or at Shure.com/anx4) and managed via your ShureCloud user account.
All the exceptional features found in award-winning Axient Digital and ULX-D receivers that have made them standards on stages, in facilities, on tour, and on location throughout the world are available in the ANX4. Whether you operate ANX4 in Axient Digital or ULX-D transmission mode, ANX4 maximizes your budget, rack space, and rack weight in delivering large wireless audio channel counts in a single rack design. What's more, this 1RU format also enables streamlined antenna configurations for large channel count environments.
Why We Like This
The ANX4 packs high channel counts into a single 1RU unit, making it ideal for large-scale wireless setups without increasing rack space. Its flexible, license-based system lets you scale channels as needed, helping you adapt to different production demands without replacing hardware.
FAQs
Q: How many channels can the ANX4 support?
A: It supports up to 16 channels of Axient Digital or 24 channels of ULX-D wireless audio.
Q: Are channels included out of the box?
A: No, channels are activated through purchasable licenses that can be added in increments.
Q: Can licenses be moved between units?
A: Yes, licenses are transferable and can be activated on different ANX4 units as needed.
Based in Chicago, IL, Gear Club Direct supports musicians, DJs, and creators every day with reliable gear and expert service.
Tech Specs
Housing: |
Steel; Extruded aluminum; Case top: Aluminum |
Storage Temperature Range: |
-20 Degree F to 165 Degree F (-29 Degree C to 74 Degree C) |
Thermal Power Dissipation: |
Maximum: 61.3 W (209.3 BTU/hr.); Idle: 49.2 W (167.9 BTU/hr.) |
Power Requirements: |
100 to 240 V AC, 50-60 Hz, 1.4 A max. |
Fuse: |
T5A |
PoE: |
PoE Class 1 (IEEE 802.3af) |
RF Spurious Rejection: |
>80 dB, typical |
RF Connector Type: |
BNC |
RF Impedance: |
50 Ohm |
RF Configuration: |
Unbalanced, passive |
RF Bias Voltage: |
12 to 13.5 V DC, 150 mA maximum per antenna; Switchable on-off; 300 mA total per receiver |
RF Insertion Loss: |
0 dB, typical |
RF Carrier Frequency Range: |
174 - 2000 MHz |
Working Range: |
330' (100m) |
Gain Adjustment Range: |
-18 to +42 dB in 1 dB steps (plus Mute setting) |
RF Tuning Step Size: |
25 kHz, varies by region |
Image Rejection: |
> 90 dB, typical |
RF Sensitivity: |
ULX-D: -95 dBm at 10-5 BER; Axient Digital: -93.5 dBm at 10-5 BER |
Latency: |
ULX-D Standard: < 2.9 ms; ULX-D High Density: < 3.2 ms; Axient Digital Standard: < 2.1 ms; Axient Digital High Density: < 3.0 ms |
Headphone Audio Frequency Response: |
20 Hz - 20 kHz (+/-1 dB); 20 Hz - 20 kHz, +/- 3 dB |
Audio Dynamic Range: |
124 dB A-weighted |
Total Harmonic Distortion: |
< 0.1% |
System Audio Polarity: |
Positive pressure on microphone diaphragm produces positive voltage on pin 2 and tip of 6.35 mm output |
Headphone Configuration: |
1/4" / 6.3 mm connector, unbalanced stereo |
Headphone Impedance: |
63 Ohm |
Maximum Signal Level: |
350 mW |
Pin Assignments: |
Tip: Audio + Left; Ring: Audio + Right; Sleeve: Ground |
Network Interface: |
10/100 Mbps; 1 Gbps; Dante Digital Audio |
Network Addressing: |
DHCP or Manual IP address |
Maximum Cable Length: |
330' (100m) |
DC Input Voltage Range: |
11.3 to 16 V DC, 10 A max |
Maximum DC Input Current: |
5.5 A, 10 A max |
Protection Modes: |
Reverse polarity; over voltage |
DC Connector Type: |
4-pin XLR (male) |
Dimensions: |
1.7 x 19 x 11.3" (44 x 482 x 286mm) |
Delivery & Returns
At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.
The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE
