Description
The iconic guitar amp that started it all The undisputed go-to guitar amp for scores of rock, hardcore, and metal bands since 1992. Known for its raw tone, relentless power, and road-proven reliability, the 6505 1992 Original delivers an unparalleled stage presence with enough volume for any gig. Packed with five (5) 12AX7 preamp tubes and four (4) 6L6GC power amp tubes, this beast generates a monstrous 120 watts RMS of power. With its merciless ultra-high gain preamp capabilities and innovative Presence and Resonance controls paired with a shared three-band EQ, you'll shape savage tones that cut through any venue. When combined with per-channel Pre-Gain and Post-Gain knobs providing near-infinite gain staging, the 6505 1992 Original offers endless sonic customization. With the power of the 6505 1992 Original behind you, elevate your sound to new heights in the studio or on stage. Limitless power and customization Enjoy dialing in your favorite tones with Pre-Gain and Post-Gain knobs that allow for extensive sonic customization. Ride the glassy crisp-clean rhythm tones or stomp the crunch to unleash the stadium shaking overdrive you expect from this one-of-a-kind amp. Tap into endless sustain and let your tones ring throughout the arena. For maximum flexibility, a footswitchable effects loop, preamp output and bright/crunch voicing switches (rhythm channel) are included. The included 2-button foot switch lets you toggle between Lead/Rhythm channels and effects loop switching with ease. Compatible with 16-, 8-, and 4-ohm speakers, the 6505 1992 Original is in a category all its own.
Features
- 120W RMS
- Five 12AX7 and four 6L6GC tubes
- Rhythm and Lead channels
- Per-channel Pre/Post Gain
- Shared three-band EQ
- Presence/Resonance
- Bright/Crunch switches
- Included two-button footswitch
Why We Like This
Separate gain and output controls on both channels make it easier to balance rhythm and lead. The included switch also keeps channel and loop changes available during the song.
FAQs
Q: Does it need a separate speaker cabinet?
A: An amplifier head needs a compatible cabinet or a manufacturer-approved silent operating setup. Follow the model’s load instructions.
Q: Should I use a guitar cable to the cabinet?
A: Use a suitable speaker cable for an amplifier’s powered speaker output.
Q: Can the direct output power a passive speaker?
A: No. A direct output feeds compatible recording or PA equipment rather than supplying speaker power.
Based in Chicago, IL, Gear Club Direct supports musicians, integrators, and creators every day with reliable gear and expert service.
Tech Specs
Clean Channel (with channel select out) — Maximum Input Level: |
0 dBV, 1.0 V RMS |
Clean Channel (with channel select out) — Minimum Input Level: |
-50 dBV, 3 mV RMS |
Clean Channel (with channel select out) — Nominal Input Level: |
+34 dBV, 20 mV RMS |
Clean Channel — Crunch Switch Adjustment: |
Subtract 16 dB with Crunch switch in |
Effects Return — Designed Level: |
-10 dBV, 300 mV RMS |
Effects Return — Impedance: |
Very high Z, 470K ohms |
Effects Send — Load Impedance: |
47K ohms or grater |
Effects Send — Nominal Output: |
-10 dBV, 300 mV RMS |
Equalization: |
Custom Low, Mid & High passive type EQ |
Frequency Response: |
+0, -3 dB, 50 Hz to 20 kHz, @ 100 W RMS into 8 ohms |
Hum & Noise: |
Greater than 75 dB below rated power |
Lead Channel (with channel select in) — Minimum Input Level: |
92 dBV. /025 mV RMS |
Lead Channel (with channel select in) — Nominal Input Level: |
-80 dBV, -1 mV RMS |
Power @ Clipping: |
130 W RMS into 16, 8, or 4 ohms (Typically @ 5% THD, 1 kHz, 120 V AC line; bias must be reduced to measure) |
Power Amp EQ — Active Presence: |
+10 dB 2 kHz |
Power Amp EQ — Active Resonance: |
+10 dB @ cabinet resonant frequency |
Power Consumption (Domestic): |
400 watts 50/60 Hz, 120 V AC |
Preamp High Gain Input — Impedance: |
Very high Z, 470K ohms |
Preamp Low Gain Input: |
-6 dB pad; impedance: High Z 44K ohms; all levels are increased by +6 dB |
Preamp Measurement Conditions: |
Measured @ 1 kHz with Low & High EQ @ 0; Bright out; Lead & Rhythm Post @ 10; Presence & Resonance @ 0 dB; nominal levels with Pre Gains @ 5; minimum levels with Pre Gains @ 10 |
Preamp Output — Load Impedance: |
47K ohms or grater |
Preamp Output — Nominal Output: |
+10 dBV, 3 V RMS |
Product Type: |
Guitar Amp Head |
Push Bright (Rhythm channel only): |
+6 dB @ 2 kHz |
Push Crunch (Rhythm channel only): |
Increases gain |
Rated Power & Load: |
120 W RMS into 16, 8, or 4 ohms |
Remote Footswitch: |
Special 2 button unit with LED indicators (supplied); channel select & Effects loop bypass |
System Hum & Noise @ Nominal Level (Clean channel): |
Greater than 74 dB below rated power; 20 Hz to 20 kHz unweighted |
Delivery & Returns
At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.
The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE
Text Us +1 773-430-6136