Description

Neumann V 402 Rackmount 2-Channel Microphone Preamplifier

Handmade and sonically pristine, the Neumann V 402 is a rackmount 2-channel microphone, instrument, or line preamplifier, painstakingly designed to deliver the true sound of your source at any gain setting. Its tranformerless circuitry ensures detailed sound without coloration, and its onboard studio-grade headphone amp enables convenient monitoring of your live inputs.

With up to 60 dB of gain, switchable -20 dB pads, and 60 Hz high-pass filters, you can easily dial in and optimize your signal while avoiding distortion and degradation. Front-panel DI inputs make the V 402 equally ideal for Hi-Z instruments such as electric guitar and bass, as well as dynamic and condenser microphones.

Each channel also provides selectable 48V phantom power, switchable polarity, and a multi-segment meter. Separate volume controls allow you to adjust the balance for the monitoring mix, which feeds the front-panel 1/4" headphone output.

Ultraclean transformerless design with up to 60 dB of gain
Switchable -20 dB pad for handling high-level sources up to 28 dBu without distortion
60 Hz low-cut filter removes pops and rumble without signal degradation
Balanced XLR inputs and outputs
Two studio-quality 1/4" instrument inputs with very high impedance
Clean studio-grade headphone amplifier (mono/stereo switchable)
Per-channel volume control for easy monitoring mix
Rear-panel ground-lift switch
Occupies 2 RU of rack space
Handmade in Germany

Neumann V 402 Specs

Number of Channels: 2

Inputs:

2 x XLR 3-Pin Female Balanced Mic Inputs
2 x 1/4" TS Female Unbalanced Hi-Z Inputs

Outputs:

2 x XLR 3-Pin Male Balanced Line Outputs
1 x 1/4" TRS Female Unbalanced Headphone Output (Mono/Stereo Switchable)

Pad: -20 dB

Low-Cut Filter: 12 dB/Octave at 60 Hz

Phantom Power: 48 VDC, ≥10 mA (Selectable per Channel)

Frequency Range: <10 Hz to >100 kHz (-3 dB at 40 dB Gain)

Gain Range:

Mic Input: +20 to +60 dB (Pad Off)
Hi-Z Input: 0 to +40 dB (Pad Off)

Maximum Input Level:

Mic Input (Pad Off): +8 dBu
Mic Input (Pad On): +28 dBu
Hi-Z Input: +21 dBu

Maximum Output Level:

Main Output: +26 dBu into 1-Kilohm Load Impedance
Headphone Output: +20 dBu into 150-Ohm Load Impedance

Input Impedance:

Mic Input: Approximately 3 Kilohms
Hi-Z Input: 3.3 Megohms

Output Impedance:

Main Output: Approximately 200 Ohms
Headphone Output: Approximately 2 Ohms

Metering: -24 to +24 dBu in 6 dB steps
Peak Indication at +24 dBu (Hold Time Approximately 3 Seconds)

Ground Lift: Switchable

Power Requirements: 100 to 120 VAC and 220 to 240 VAC, 50/60 Hz

Power Consumption: 25 W Maximum

Operating Temperature: 32 to 122°F / 0 to 50°C

Storage Temperature: -13 to 158°F / -25 to 70°C

Operating Humidity: <75% Relative Humidity at 104°F / 40°C (Noncondensing)

Storage Humidity: <95% Relative Humidity (Noncondensing)

Altitude (Operating): Up to 6562 ft / 2 km

Dimensions: 19.0 x 3.5 x 9.5" / 48.3 x 8.9 x 24.2 cm

Weight: 13.6 lb / 6.2 kg

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE