Microphone Accessories

AKG H1 Magnet Clip for MicroLite Microphones (White, 5-Pack)

AKG 3361H00340 Overview The AKG 12" CS321 Condenser Gooseneck Microphone for CS3 System has been designed to keep it simple for mobile and fix-installed conferences. The CS321 high-performance condenser gooseneck...

AKG W40 M Overview The AKG W40 M is a microphone windscreen with two layers of mesh and a combination of foam which greatly reduce wind, breath, and pop noise. The W40 M's wiremesh grill can provide protection for...

AKG 3165H00220 Overview The MF M-Flush Mount Flange Module with Cover from AKG is a flush mount module that efficiently reduces body noise from tables. Its slim design can integrate each powering module of the DAM+...

AKG PAE5 M Overview The AKG PAE5 M is a phantom power module that fits DAM+ series mic capsules for fixed and mobile installations. It features a five-pin XLR connector, allowing the audio signal and the control voltage for an...

AKG PAE M Overview The PAE M 3-Pin XLR Phantom Power Module Adapter by AKG provides phantom power with a gold-plated three-pin XLR connector. With its wide voltage range the module will perform with most available...

AKG 2967H00020 Overview The STS DAM+ WLS from AKG is a modular and flexible conference tabletop base that is designed to hold a wireless bodypack transmitter, a single AA battery and a gooseneck microphone (sold...

Beyond all limits AB4000 EW is a high-performance antenna booster to compensate signal loss on long antenna cables. One AB4000 EW can compensate 3.5 to 17.5 dB of cable attenuation. Up to two boosters can be cascaded in case of extremely long cable...

H3 CROCO CABLE CLIPNEW CROCO CABLE CLIP FOR MICROLITE MICROPHONES The H3 croco cable clip can be used on all MicroLite microphones, and helps to position the cable close to the body. Contain 5 pack 

AKG H2 Croco Clip for Microlite Headphones The H2 croco—a standard "crocodile" clip—is part of the MicroLite series and holds the microphone housing, instead of the delicate cable to ensure a tight hold as well as protecting the cable from...

AKG H1 Magnet Clip for MicroLite Microphones The H1 magnet clip is part of the MicroLite series and holds the microphone housing, instead of the delicate cable to ensure a tight hold as well as protecting the cable from breaking. Using the mangnet, the...

AKG WM82 Wiremesh Cap Microlite Every microphone in the MicroLite Series is a star performer, ready to deliver great sound under the most intense conditions. Omnidirectional versions can be used without protection, or with the WM82 wire-mesh protection...