Martin VC-Strip 16x1 25 RGB

Write a Review
0.10 (in)
0.10 (in)
0.10 (in)
Free Shipping
Current Stock:


The VC-Strip family of narrow LED video strips is ideal for integration of video into stage and set designs, interiors, custom set elements and more. VC-Strips are fully pixel-level calibrated on brightness and colors for optimal uniformity and quality and are driven by Martin’s award-winning P3 System Controller family for smooth playback that outperforms any DMX-based system. VC-Strips are available in various lengths and can even be cut to required length on-site.


  • 16/8 individually controllable pixels
  • 4000 nits of brightness
  • High-quality, 16-bit per color image processing technology
  • Pixel-level brightness and color calibration for optimal image quality
  • P3/DMX controllable (automatic protocol detection)
  • Intuitive mapping and addressing via P3 System Controller
  • Combined power/data input (single cable for power and data input)
  • Combined power/data thru (to daisy-chain up to 45 VC-Strips)
  • Available in RGB, cool white, medium white and warm white
  • Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
  • Length of VC-Strip can be customized on-site (simple cutting) to fit integration needs
  • Compatible with VC-Grid



    • VC-Strip 16x1 25™:

      Length: 400 mm (15.8 in.) *
      Width: 20 mm (0.8 in.)
      Height: 18 mm (0.7 in.)
      Weight: 43 g (0.1 lbs.)

    • VC-Strip 8x1 25™:

      Length: 200 mm (7.9 in.) *
      Width: 20 mm (0.8 in.)
      Height: 18 mm (0.7 in.)
      Weight: 26 g (0.06 lbs.)

    • *Including 1 mm board-to-board gap

Control and Programming

    • Control options: Martin P3 System Controller™ via Martin P3 PowerPort 1500™ and/or DMX
    • Control modes: Pixel and module
    • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
    • Protocol detection: Automatic
    • Setting and addressing: P3 System Controller or RDM-compliant controller
    • DMX channels: Pixel mode 16x1 model = 48, 8x1 model = 24; Module mode (all models) = 3
    • Color and intensity calibration: Pixel-level
    • Firmware update: Via P3 System Controller
    • DMX compliance: USITT DMX512-A
    • RDM compliance: ANSI/ESTA E1.20

Control/User Interface

    • Device status: Multi-color visual indication
    • Device test and reset: Pushbutton to call up local test patterns and reset device


    • Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
    • *Figure obtained under manufacturer´s test conditions

Photometric Data

    • Pixels: 16/8 per module
    • Luminous intensity, calibrated mode: 4000 Nit
    • Viewing angle: 120° x 120°

Video Processing

    • Brightness control
      Gamma correction and control
      Color temperature control
      Color gamut control
      Calibration processing


    • Base: Black FR4 circuit board
    • Protection rating: IP20
    • RoHS compliant


    • Mounting: Mounting holes in module
    • Orientation: Any
    • Maximum number of VC-Strip™ 16x1 25 modules per daisy-chain: 45
    • Maximum number of VC-Strip™ 8x1 25 modules per daisy-chain: 63


    • Power & data input: 4-pin Molex connector
    • Power & data thru: 4-pin Molex connector


    • Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU
    • Peak power consumption (at full intensity, full white): 16x1 model 8 W; 8x1 model 4 W
    • Typical power consumption (with typical video content): 16x1 model 3 W; 8x1 model 1.5 W
    • Figures for typical video content are indicative only and will vary. Power consumption figures include cable and assume a 50 m chain


    • Cooling: Convection
    • Maximum ambient temperature (Ta max.): 45° C
    • Minimum ambient temperature (Ta min.): -20° C
    • Peak heat dissipation (calculated, at full intensity, full white): 16x1 model 28 BTU/hr.; 8x1 model 14 BTU/hr.
    • Typical heat dissipation (calculated, with typical video content): 16x1 model 11 BTU/hr.; 8x1 model 5.5 BTU/hr.
    • Figures for typical video content are indicative only and will vary.


    • EU safety: EN 60950
    • EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
    • US safety: ANSI/UL 60950-1
    • Canadian safety: CSA C22.2 No. 60950-1


  • VC-Grid™/Strip™ 25 Mounting Frames, set of 10: P/N 91611370
  • VC-Grid™/Strip™ 25 Lens Arrays, Narrow, set of 8: P/N 91611540

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final. 


The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange.  READ MORE

Customer Reviews