Martin RUSH Strobe 1 5x5

This white strobe/blinder is a 5 x 5 LED matrix panel with individually-controllable LEDs. Controllable via multiple DMX options or sound activated, it includes preprogrammed effect, letter and number macros for easy-to-produce graphics and messaging. Panels link via an integrated horizontal and vertical locking mechanism.

Features

• White LED strobe/blinder
• 5 x 5 matrix panel
• Individually controllable LEDs
• Preprogrammed macros (effects, letters, numbers, etc.)
• Linkable - integrated horizontal and vertical locking
• DMX or sound activated
• Multiple DMX control options
• 3 & 5 pin XLR

Specifications

Physical

• Length: 500 mm (19.7 in.)
• Width: 101 mm (4.0 in.)
• Height: 500 mm (19.7 in.)
• Weight: 9.5 kg (20.9 lbs.)

Dynamic Effects

• Strobe effect: Electronic, with regular and random pulse, burst and strobe effects
• Pre-programmed effects: Effect, letter and number display macros
• Electronic dimming: 0 - 100% continuous, individually dimmable pixels
• Effects orientation: Standard or inverted 180°

Control and Programming

• Control options: DMX, stand-alone
• DMX channels: 4/25/29
• Stand-alone trigger options: Music trig, auto trig
• Stand-alone sequences: 8 pre-programmed shows or random show
• Stand-alone memory: 20 scenes
• Setting and addressing: Control panel with LED display
• DMX compliance: USITT DMX512/1990

Optics

• Light source: 25 x 5 W Cree cool white LEDs
• Color temperature: 6000 - 6500 K
• Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
• *Figure obtained under manufacturer´s test conditions
• Construction
• Color: Black
• Housing: Steel
• Protection rating: IP20

Installation

• Location: Indoor use only, must be fastened to surface or structure
• Mounting points: Integral hanging brackets (removable), side-by side mounting locks
• Orientation: Any

Connections

• AC power in/thru: Neutrik PowerCon
• DMX data in/out: 3-pin and 5-pin locking XLR

Electrical

• AC power: 100-240 V nominal, 50/60 Hz
• Typical total power consumption: 148 W
• Power consumption figures are typical, not maximum. Allow for +/-10% variation.
• Typical Power and Current
• 110 V, 60 Hz: 2.0 A, 148 W
• 230 V, 50 Hz: 1.2 A, 146 W
• Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal

• Cooling: Forced air (temperature-regulated, low noise)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): 0° C (32° F)
• Total heat dissipation (calculated, +/- 10%): 510 BTU/hr.

Approvals

• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
• US EMC: 47 CFR Part 15 Class A
• Canadian EMC: ICES-003 Class A
• Australia/NZ: C-TICK N4241