Martin EXTERIOR PROJECTION 500 MG, Narrow, US

The Exterior Projection 500 is a powerful fixture for integrating textures, patterns and graphics in outdoor lighting designs. The fixture can be used for bright and dynamic logo projection as well as precision framing.

Using advanced LED technology, it offers outstanding energy efficiency, compact size and unlimited creative possibilities.

Creating custom gobos for building facades

• Flat-field, high-contrast image projection
• Fully weatherized for trouble-free use with minimal maintenance in outdoor installations
• Packed with features, allowing huge creativity in setting up exciting lighting effects

Features

• Up to 6100 lumens output with 4 beam angles variants from narrow to wide
• Powerful close-range and long-range projection
• Flat-field, high-contrast image projection based on high-power LED engine
• 4 layers of versatile dynamic effects (colors, gobo projection, gobo animation, prisms/frost)
• Crisp image projection
• Rugged IP66-rated housing
• Minimal maintenance – low total cost of ownership

Specifications

Physical

Length: 415 mm (16.4 in.)

Width: 293 mm (11.6 in.)

Height: 444 mm (17.5 in.)

Weight: 17.5 kg (38.6 lbs.)

All figures include mounting yoke

Dynamic Effects

Color wheel: 8 interchangeable colors + open

Gobo wheel: 6 rotating gobos plus open, indexing, variable rotation

Gobo animation: Variable speed linear animation effect

Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing

Frost (wash effect): Motorized variable

Focus: Motorized, variable 3 m (9.8 ft.) to infinity

Dimming: Electronic, constantly variable 0-100%, 16-bit control

Shutter: Strobe and pulse effects, instant open and blackout

Control and Programming

Control options: DMX, RDM, standalone

Control resolution: 8-bit DMX control of each color

Configuration, addressing and status: Onboard control panel with OLED display

DMX channels: 13

DMX compliance: USITT DMX512-A

RDM compliance: ANSI/ESTA E1.20

Optics

Light source: 230 W white light LED engine

CRI (Color Rendering Index): 72

Color temperature: 8300 K

LED lifetime: 20,000 hours (to >70% luminous output)

LED manufacturer: Prolight Opto

Figure obtained under manufacturer's test conditions

Photometric Data

Narrow:

Cut-off angle: 12°

Total output: 5000 lumens

Center peak: 203,000 cd

Medium:

Cut-off angle: 22°

Total output: 6100 lumens

Center peak: 77,000 cd

Wide: Cut-off angle: 36°

Total output: 5700 lumens

Center peak: 28,000 cd

Very Wide:

Cut-off angle: 50°

Total output: 3400 lumens

Center peak: 11,000 cd

Construction

Housing: Cast aluminum

Finish: Hard anodized, metallic grey lacquered

Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass

Ingress protection: IP66

Impact resistance: IK08 (with control panel display cover plate installed)

Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)

EPA (Effective Projected Area): 0.15 m2

RoHS compliant

Gobos

Suitable material: Borosilicate glass, coatings heat-resistant to 450°C (842° F)

Alternative material: Aluminum 1060, paint on front lens side, 450° C (842° F)

Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)

Maximum image diameter: 23 mm (0.91 in.)

Glass gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)

Glass gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.)

Aluminum gobo thickness: 0.5 mm ± 0.02 mm (0.020 in. ± 001 in.)

HT paint

Installation

Mounting: Adjustable yoke

Location: Suitable for wet locations. Do not immerse in water.

Orientation: Any (sides must be kept vertical)

Minimum distance to illuminated surfaces: 0.5 m (20 in.)

Connections

Power cable entry: IP68 cable gland

Power connection: 1.8 m (5.9 ft.) cable tail with bare ends

Data cable entry: IP68 cable gland

Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

Electrical

AC power: 100-240/277 V nominal, 50/60 Hz

Power Supply: Auto-ranging electronic switch-mode

Typical half-cycle RMS inrush current: 8.4 A

Surge protection: 4 KV

Idle power (zero intensity, no effects applied): 32 W, 0.3 A

Typical Power and Current

110 V, 60 Hz: 320 W, 2.9 A, PF 0.977

230 V, 50 Hz: 310 W, 1.4 A, PF 0.971

277 V, 60 Hz: 305 W, 1.2 A, PF 0.950

Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal

Cooling: Convection, internal forced air

Total heat dissipation (calculated): 1100 BTU/hr.

Maximum surface temperature: 85° C (185° F)

Maximum ambient temperature (Ta max.): 45° C (113° F)

Minimum ambient temperature (Ta min.): -30° C (-22° F)

Above this temperature, the fixture regulates output to protect from overheating.

For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)

Approvals

EU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493

EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547

US safety: ANSI/UL 1598

US EMC: CFR 47 Part 15 Class A

Canadian safety: CSA C22.2 No 250.0

Australia/NZ: RCM

Accessories

Glare Shield, Exterior Projection 500, aluminum: P/N 91611767

Projection Setup Gobo: P/N 91616068

EP-500, Manual Framing Module: P/N 91611842