Description

Martin 90232105 MAC Aura XB White in cardboard

The MAC Aura XB takes an award-winning, innovative, compact LED wash light to the next level, incorporating many new features first introduced with the MAC Quantum Wash™. Not only does the MAC Aura XB offer additional brightness, it also features a new superior color mixing system and an optimized lens design for tighter beams and more even washes. Martin's unique and patented Eye-candy Aura Effect™ is also part of the package.

Super bright single lens wash with fully premixed color
Compact design and low weight
High efficiency, low power consumption, long service life

Features

Super-bright single-lens wash with fully premixed color
Broad color palette, RGBW color mixing
Eye-candy Aura Effect™
Uniform shades
Built-in FX engine
10 to 60° uniform zoom
6000 Lumens output
Rapid movement
Compact, low weight design (6.5 kg)
High efficiency, low power consumption, long lifetime

Specifications

Physical

Length (across yoke): 302 mm (11.9 in.)
Width (across yoke): 302 mm (11.9 in.)
Height (head straight up): 360 mm (14.2 in.)
Weight (without accessories): 6.5 kg (14.4 lbs.)

Dynamic Effects

Beam color mixing: RGBW
Aura (secondary lens array illumination) color mixing: RGB
Beam color temperature control: CTO, variable 10 000 - 2500 K
Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
Pre-programmed effects: Range of independent and synchronized Beam and Aura FX, two combinable
Electronic dimming: Independent beam and aura, four dimming curve options
Zoom: 10° - 60° (one-tenth peak angle)
Pan: 540°
Tilt: 232°
Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming

Control options: Independent or synchronized Beam and Aura control
Control system: DMX, RDM
Control resolution: 8-bit, with 16-bit control of pan & tilt
DMX channels: 14/25
Setting and addressing: Control panel with backlit graphic display
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: RS-485
Firmware update: Via DMX with Martin™ USB Duo DMX Interface Box
Optics and Photometric Data
Light source: 19x 15W RGBW LED Array System
LED refresh rate: Beam 1200 Hz, Aura 4395 Hz
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Total luminous output (wide, one-tenth peak): 6000 lumens
Total luminous output (narrow, one-tenth peak): 4300 lumens
Video compatibility: Designed for use with HD/high-speed video cameras
*Figure obtained under manufacturer´s test conditions

Construction

Color: Black
Housing: High-impact thermoplastic, flame-retardant to UL 94 5VA
Protection rating: IP20

Installation

Mounting points: M12 hole for rigging clamp, attachment points for surface-mounting bracket
Orientation: Any
Minimum distance to combustible materials: 200 mm (8 in.) from fixture
Minimum distance to illuminated surfaces: 1 m (3 ft. 4 in.) from fixture
Location: Indoor use only, must be fastened to surface or structure

Connections

AC power: Neutrik PowerCON TRUE1 NAC3PX dual socket
AC power input socket: Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector
AC power thru socket: Accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector
DMX data in/out: 5-pin locking XLR

Electrical

Maximum power consumption: 400 W
Power supply unit: Auto-ranging electronic switch mode
AC power: 100-240 V nominal, 50/60 Hz
Typical half-cycle RMS inrush current: 10.7 A
Power consumption, all effects static, zero light output: <25 W
Typical Power and Current
100 V, 60 Hz: 359 W, 3.8 A, PF 0.99
120 V, 60 Hz: 355 W, 3.2 A, PF 0.99
208 V, 60 Hz: 350 W, 1.8 A, PF 0.97
230 V, 50 Hz: 349 W, 1.7 A, PF 0.95
240 V, 50 Hz: 349 W, 1.6 A, PF 0.95

Thermal

Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Total heat dissipation (calculated, +/- 10%): 1230 BTU/hr.

Approvals

EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class A
Canadian safety: CSA E598-2-17 (CSA E60598-1)
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241

Tech Specs

$500 - $15,000 INSTANT APPROVAL / NO HARD CREDIT PULL:

Apply Now

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE