Text Us +1 773-430-6136
Description
First choice studio microphone.
Lewitt’s LCT 840 is a premium-class externally polarized dual-diaphragm tube microphone designed to excel in a variety of demanding applications. Equipped with a precision-engineered 1-inch capsule, the LCT 840 stands for exceptionally warm and classic, solid vintage sound. Perfectly suited for miking vocals and instruments, this rugged multi-purpose microphone allows for highly nuanced and authentic sound reproduction in the studio and even on stage. Five switchable polar patterns – omni-directional, cardioid, figure-8, wide-cardioid and super-cardioid – make the LCT 840 a highly versatile tool for professional audio engineers and performers looking for true and authentic tube sound.
Like all Lewitt mics, the LCT 840 stands out for its extremely low self-noise of 9 dB and effective rejection of off-axis sounds. The microphone features three levels of attenuation and three switchable high-pass filters, LEDs and pushbuttons for noiseless handling on the power supply unit (PSU).
Apart from user-friendly operating controls and advanced technological features so essential to memorable recordings, the LCT 840 also makes an eye-catching design statement: The microphone is equipped with a plexiglass inspection window on the front side of the body, so the illuminated tube itself is fully exposed. The inside window surface is coated with a highly conductive, yet transparent film preventing electromagnetic interference.
In short: The unique combination of innovative design, high-end technology and tube-typical sound quality ensures magical takes.
Features
- Lead and background vocals
- Acoustic instruments
- Wind instruments
- Ultra-thin 1-inch externally biased, gold-layered low-mass diaphragms combined with a dual triode tube ensures accurate transient response while providing smooth, warm and airy tube sound
- Five consistent directional characteristics cardioid, omnidirectional, figure-8, broad cardioid and supercardioid offer maximum flexibility
- Superior dynamic range of 130 dB-A (Tube) and extremely low self-noise of 9 dB-A for ear-catching realism and distortion-free sonic depth
- 3-position switchable pre-attenuation pad (0 dB, 10 dB, and 20 dB) for handling extremely high sound pressure levels and 3-position high-pass filter
- Illuminated user interface and jog dials for easy handling even in dark environments
- Noiseless pushbuttons for quick and easy attenuation and HPF selection
- Unique features like clipping history and automatic attenuation provide error-free studio recording and unparalleled ease of use
- Solid die-cast metal body with a stylish, oversized tube inspection window specially coated for maximum protection against electromagnetic interference
- Custom PSU 840 power supply unit with sturdy full-metal housing and brushed, anodized black aluminum front
- Extra-large hexagonal ruthenium-galvanized steel mesh grille provides an open acoustic environment and prevents unwanted internal reflections
- Corrosion-resistant gold-plated 3-pin XLR output connector
Specifications
- Acoustical operating principle: pressure gradient transducer, externally polarized
- Transducer: 1"
- Directional patterns: omni, broad-cardioid, cardioid, super-cardioid, figure-8, all selectable on remote control
- Frequency rang:e 20 - 20.000 Hz
- Sensitivity: 23 mV / Pa (-33 dBV), cardioid
- 20 mV / Pa (-34 dBV), omni
- 23 mV / Pa (-33 dBV), figure-8
- Signal / noise ratio 85 dB-A
- Equivalent noise level (IEC 61672-1) 9 dB-A, cardioid
- 10 dB-A, omni (IEC 61672-1)
- 9 dB-A, figure-8 (IEC 61672-1)
- Dynamic range of mic. Amp. 130 dB-A
- Max. SPL for 0,5 % THD 139 dB, 0 dB Pre-attenuation
- 149 dB, 10 dB Pre-attenuation
- 159 dB, 20 dB Pre-attenuation
- Pre-attenuation pad 10 dB, 20 dB
- selectable on remote control
- Bass cut filter slope: 12 dB / octave at 40 Hz
- 6 dB / octave at 300 Hz
- Rated impedance: < 200 ohms
- Rated load impedance: > 1.000 ohms
- Supply voltage custom power supply unit
- 230 V, 50 Hz
- 110 V, 60 Hz
- Current consumption: 170 mA
- Connector: gold plated 11-pin XLR
- Cable 8 m (26 ft)
- 11-pin audio cable
- oxygen-free copper
- Dimensions (Mic): 7,5 x 2,4 x 1,8"
- Dimensions (PSU): 9,8 x 5,9 x 2,8 inch
- Net weight (Mic): 23,3 oz
- Net weight (PSU) 66,8 oz
Tech Specs
$500 - $15,000 INSTANT APPROVAL / NO HARD CREDIT PULL: |
Warranty
null
Delivery & Returns
At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.
The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE