null
LD Systems

LD Systems MAUI44G2 Subwoofer

$1,999.99
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
LD Systems MAUI44G2 Subwoofer
Width:
25.10 (in)
Height:
25.00 (in)
Depth:
17.10 (in)
Shipping:
$50.00 (Fixed Shipping Cost)
Current Stock:

Description

The 15" LD Systems MAUI 44 G2 SUB is a 1500W powered subwoofer that is designed as a subwoofer extension to the MAUI 44 G2 column array system, which doubles the low-frequency output. The subwoofer can also be used as a standalone subwoofer for portable and install applications.

Connect the MAUI44 G2's dedicated XLR subwoofer output to the G2 SUB's right-channel input. Simply set the DSP switch to Slave and control both subwoofers from a single set of controls including sub level, sub frequency, and sub phase. The unit features LECC DSP, which provides compression, limiting, crossover, and equalization to help working presenters, musicians, instructors, performers, and A/V providers get powerful, clean, and clear sound quickly.

The subwoofer features 121 dB of continuous SPL (129 dB peak)—plenty of volume for smaller- to mid-sized venues including houses of worship, conference centers, performance spaces, and meeting rooms. The highly efficient 1500W (RMS) Class-D amplifier drives the 15" subwoofer, providing deep, detailed bass with a frequency range from 140 down to 37 Hz.

When using the MAUI 44 G2 SUB subwoofer extension, the "Cardioid" button sets the DSP for subwoofer cardioid array performance, which helps direct the bass frequencies forward, while lowering the bass behind the speaker setup for better stage performance. For I/O, the rear panel offers two balanced XLR (L/R) line inputs and two XLR Thru-outputs for daisy-chaining to additional speakers or other audio equipment. The MAUI 44 G2 Sub includes a power cord.

Features

  • Powered 15" subwoofer with flow-optimised bass-reflex ports
  • 15" custom-designed woofer with deep bass down to 37 Hz
  • Preset-Switch for cardioid subwoofer configuration
  • DynX® DSP technology for distortion-free sound at maximum volume
  • Automatic set-up detection
  • Rugged subwoofer housing made out of polyurea-coated birch plywood
  • Shockproof front grille for ultimate speaker protection
  • Two ergonomic handles covered in rubber for easy handling
  • Attachment points for our MAUI® 44 G2 CB castor board

Protection Circuits

  • DSP-based multiband limiter, overvoltage, overcurrent, and short circuit

Tech Specs

Product type:
PA Complete Systems Accessories
Type:
Powered
Low/mid Woofer dimensions:
15 "
Woofer dimensions (mm):
381 mm
Woofer magnet:
Neodymium
Woofer brand:
Custom-made
Woofer voice coil (inch):
4 "
Woofer voice coil (mm):
101 mm
Amplifier:
Class D
System Power (RMS):
800 W
Peak power:
1600 W
Max. SPL (Peak):
126 dB
Protection circuits:
Convection, DC, limiter, Short circuit, thermal overload
Controls:
Bluetooth HOLD TO LINK button, Bluetooth STEREO LINK button, Cardioid On/Off, Main level, Power On/Off, Sub level
Indicators:
Bluetooth, Bluetooth STEREO LINK, Cardioid On/Off, Follower mode, Limit, Power, Protect (protection circuit engaged), Signal
Bluetooth Standard:
A2DP
Bluetooth Audio Decoder:
AAC, aptX, SBC
Line inputs:
2
Line input connectors:
2 x XLR
Line outputs:
2
Line output connectors:
2 x XLR
Loudspeaker outputs:
1
Speaker output connections:
Custom-made multipin
Power supply:
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching), Switching power supply
Operating Temperature:
0 - 40 °C
Relative Humidity:
< 80% (non-condensing)
Cabinet material:
18 mm Birch Plywood
Cabinet surface:
Polyurea
Cabinet construction:
Bass Reflex
Bit depth AD/DA converter:
24 bit
Sampling frequency:
48 kHz
Signal-to-noise ratio:
106 dB

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final. 

 

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange.  READ MORE