Text Us +1 773-430-6136
Description
Amazingly Balanced Sound for Any Room or Theater
The CBT 70J-1 from JBL is a 2-way line array column loudspeaker, ideal for use in auditoriums, lecture halls, stadiums, theme parks, and more. The unit features four 5" high-power low frequency drivers and sixteen 1" soft dome tweeters to provide plenty of power and a wide frequency response.
The asymmetrical vertical coverage provides consistent front-to-back sound levels, while the patent-pending Constant Beamwidth Technology provides constant directivity and reduces out-of-coverage lobing. The vertical pattern coverage is switchable between 45° and 25°, allowing you to choose the best use for medium-throw or long-throw applications.
Switchable voicing provides a flat response in music mode and a mid-range presence boost in speech mode to accommodate music and speech programs. Built-in SonicGuard technology provides overload protection for HF devices. This model includes an improved mounting bracket that affords enhanced aiming flexibility and a stronger grille.
Features
- Ideal for use in auditoriums, lecture halls, stadiums, theme parks, and more
- Four 5" high-power low frequency drivers and sixteen 1" soft dome tweeters provide plenty of power and a wide frequency response
- Asymmetrical vertical coverage provides consistent front-to-back sound levels by sending more sound towards far areas of a room
- Patent-pending Constant Beamwidth Technology provides constant directivity at all frequencies and reduces out-of-coverage lobing
- The vertical pattern coverage is switchable between 45° and 25°, allowing you to choose the best use for medium-throw or long-throw applications
- Switchable voicing provides a flat response in music mode and a mid-range presence boost in speech mode to accommodate music and speech programs
- Built-in SonicGuard technology provides overload protection for HF devices
Improved Mounting Bracket
- Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt)
- Continuously variable +/-15 degree tilt, as well as 5-degree fixed increment points
- Ten threaded mounting points located on back panel of cabinet conform to industry standard rectangular 5.0 x 2.75" (127 x 70 mm) pattern for OmniMount 60.0 and other compatible third-party brackets
- Threaded mounting points can be utilized for suspension
Specifications
- Active or Passive: Passive
- Frequency Response: 60Hz - 20kHz
- Power Capacity
- 500W (2000W Peak), 2 Hours
- 350W (1400W Peak), 100 Hours
- Maximum Sound Pressure Level (SPL)
- Narrow:
- Speech Mode: 125dB Continuous, 131dB Peak
- Music Mode: 120dB Continuous, 126dB Peak
- Broad:
- Speech Mode: 123dB Continuous, 129dB Peak
- Music Mode: 119dB Continuous, 125 Peak
- Nominal Sensitivity
- Narrow:
- Speech Mode: 98dB (1kHz - 8kHz)
- Music Mode: 93dB (300Hz - 18kHz)
- Broad:
- Speech Mode: 96dB (1kHz - 8kHz)
- Music Mode: 92dB (300Hz - 18kHz)
- Impedance: 8 Ohms
- Crossover: Not Specified by Manufacturer
- Low Frequency Driver
- Four 5" (130 mm) Drivers, Dual Magnet Neodymium, 1.5" (38 mm) Voice Coil, Damped Blended Textile Surround, Coated Diaphragm for Moisture, UV, and Salt Resistance, Shielded
- High Frequency Driver: Sixteen 1" (25 mm) Drivers, Dual Magnet Neodymium, Encased Magnet and Coated Diaphragm for Moisture, UV and Salt Resistance, Shielded
- Enclosure Material: Fiberglass Reinforced ABS Cabinet, Painted Aluminum Grille
- Input Connections: Speaker Wire Terminals
- Compliance
- IP-54 rated per IEC529
- UV, moisture and salt-spray resistant
- Dimensions (HxWxD): 27.4 x 6.7 x 9.3" (694 x 170 x 237 mm)
- Weight: 21 lb (9.5 kg)
Tech Specs
$500 - $15,000 INSTANT APPROVAL / NO HARD CREDIT PULL: |
Delivery & Returns
At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.
The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE
