Text Us +1 773-430-6136
Description
Line Array Column Loudspeaker with with Sixteen 50 mm (2 in) Drivers and EN54:24 Certification
The CBT 100LA-LS, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor column speakers.
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
- EN54-24 Compliant (when installed with included MTC-PC2 panel cover).
- Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for long-throw applications.
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
- Dynamic SonicGuard™ overload protection
- Swivel (pan)/tilt wall bracket included.
- Built-in 70V/100V transformer, plus 8 ohm direct capability.
| Components | Sixteen 50 mm (2 in) Full-Range | |
| Frequency Range (-10 dB) | 120 Hz – 20 kHz | |
| Coverage Pattern | Vertical: Narrow Mode: 15° (2 kHz - 16 kHz) (±10°) Broad Mode: 40° (1 kHz - 16 kHz) (±10°) Horizontal: 150° (ave, 1 kHz – 4 kHz, ±20°) |
|
| Sensitivity (2.83V@ 1m) | Narrow: (speech mode) 96 dB (2 kHz - 14 kHz ) (music mode) 93 dB (300 Hz - 18 kHz) Broad: (speech mode) 93 dB (2 kHz - 14 kHz) (music mode) 90 dB (300 Hz - 18 kHz) |
|
| EN54 Sensitivity (@ 4m) | 76 dB (per EN54:24 spectrum and measurement conditions at 4 meters, set at broad/music mode.) | |
| Nominal Impedance | 8 ohms (in Thru mode) 15w@70v; 30w@100v Tap = 333Ω 30w@70v; 60w@100v Tap = 167Ω 60w@70v; 120w@100v Tap = 83Ω 120w@70v; N/C@100v Tap = 42Ω |
|
| Power Capacity (8 ohm setting) |
325 W (1300W peak), 2 hrs 200 W (800W peak), 100 hrs |
|
| Max SPL | Narrow: (speech mode) 121 dB cont ave (127 peak) (music mode) 118 dB cont ave (124 peak) Broad: (speech mode) 118 dB cont ave (124 peak) (music mode) 115 dB cont ave (121 peak) |
|
| EN54 Max SPL (@ 4m) | 92 dB (per EN54:24 spectrum and measurement conditions, at 4 meters) | |
| 70V/100V Transformer Taps | 120W, 60W, 30W, (15W at 70V only), and 8 thru, via switch | |
| Reference Axis | Specification and measurement referenced on-axis vertically and horizontally to the center point of the speaker baffle. | |
| Enclosure | Fiberglass reinforced ABS cabinet with UL94-5VB flammability rating, painted aluminum grille | |
| Outdoor Capability | IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant. | |
| Colors | Black or White (-WH) | |
| Insert Points | 18 M6 insert points on back panel. | |
| Mounting | Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension. | |
| Dimensions (H x W x D) | 1000 x 98.5 x 153 (39.4 in x 3.8 in x 6.0 in) | |
| Net Weight | 7.2 kg (15.8 lb) | |
| Safety Agency | EN54-24:2008 certified (Certificate No. 0359-CPR-00432), when installed with MTC-PC2 terminal panel cover. Cabinet UL94-5VB flammability rated. In accordance with the requirements of IEC60849/EN60849. Transformer UL registered per UL1876. | |
| Included Accessories | Swivel (pan) / tilt wall bracket MTC-PC2 terminal panel cover |
|
| Optional Accessories | MTC-CBT-FM1 flush-mount low-profile wall-mount bracket MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand |
Tech Specs
$500 - $15,000 INSTANT APPROVAL / NO HARD CREDIT PULL: |
Delivery & Returns
At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.
The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE
