Description

NMX-ENC-N2122A encodes and distributes sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility. Pair with an NMX-DEC-N2222A or NMX-DEC-N2212A Decoder to decode streams back to HDMI or DVI format for display on any monitor. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware.

Features

JPEG 2000 Digital Cinema Grade Video over IP Encoder, PoE, HDMI, AES67 Support
Input and Output Scaling - Video scaling at either input or output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity.
Power Over Ethernet (POE) - Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations.
Infrared (IR) - Infrared emitter connection allows control of low-cost, IR-only display devices.
Onboard Control - All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices.
Unlimited Scalability
Pass-Through HDMI - HDMI interface allows easy installation with local display such as desktop PC applications.
Stand Alone or Card - Available as a stand alone device, or card for use with NMX-ACC-N9206.

Why We Like This

We like the NMX-ENC-N2122A for its installation-focused approach to networked AV, making system expansion and endpoint deployment easier to plan.

FAQs

Q: What does the NMX-ENC-N2122A do?
A: The NMX-ENC-N2122A is an AMX av-over-ip encoder for professional AV and control-system installations.

Q: Where is the NMX-ENC-N2122A typically used?
A: It is intended for installed AV environments such as conference rooms, classrooms, collaboration spaces, control rooms, and other integration projects where its listed function is required.

Q: Is the NMX-ENC-N2122A currently available?
A: The source lists the NMX-ENC-N2122A as limited availability; confirm current availability before ordering.

Q: What connections are provided on the NMX-ENC-N2122A?
A: The source lists these ports: +12V 2A: One 12 Volt DC power input. P0 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides network connection, network AV video, and power to the Encoders and Decoders P1 8-wire RJ45 female 10/100/1000....

Based in Chicago, IL, Gear Club Direct supports musicians, integrators, and creators every day with reliable gear and expert service.

Tech Specs

Audio:	Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced) Output Signal Types: Ethernet at 48-kHz (standard SVSI audio stream or AES67, user selectable) HDMI Audio Formats: 8ch PCM Analog Audio Forma
Brand:	AMX
Communications:	Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP HDMI: HDCP, EDID management
Controls and Indicators - Front Panel:	RESET Button Recessed pushbutton Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings ID Button Recessed pushbutton Press to send a notification out on the network to iden
Controls and Indicators - Rear Panel:	PWR LED: Same as POWER LED described above HDMI LED: On (green) when there is a connection to a valid video source STAT LED: Same as STATUS LED described above STRM LED: On (green) when the unit is streaming video
Environmental:	Temperature: 32° to 104°F (0° to 40°C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: Up to ~44 BTU/Hr
FG Numbers:	FGN2122A-SA
General:	Dimensions (HWD): 1.05" x 7.888" x 5" (2.67 cm x 20.04 cm x 12.7 cm) Weight: 1.6 lbs (0.66 kg) Mounting Options Stand alone, surface mount, wall mount, or rack mount Surface and wall mounting requires (not included) NMX-ACC-N9101 (FGN9101), Mounting
Latency:	Video 50 ms for 720p60 Video 140ms for 1080p60 Audio Latency: standard SVSI audio stream = 17 ms (synced to video); AES67 = <1 ms adjustable to 17 ms Note: This is the combined encode plus decode latency. Total Latency from source to screen will also
Model:	NMX-ENC-N2122A
Ports:	+12V 2A: One 12 Volt DC power input. P0 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides network connection, network AV video, and power to the Encoders and Decoders P1 8-wire RJ45 female 10/100
Power Supply:	Power Supply, External, Not Included: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; Not included in shipment . NMX-ACC-N9312 (FGN9312) Power over Ethernet (PoE): Can be powered via a PoE switch or other equipment with a PoE source. Conforms t
Product Status:	Limited Availability
Product Type:	AV-over-IP Encoder
SKU:	FGN2122A-SA
Video:	Digital Video Input: HDMI, DVI-I (through adapter) Analog Video Input HD-15 VGA, Component Component is supported through a passive adapter Video Output: Network video over Ethernet via RJ45 port Formats HDMI, DVI-D (through adapter), Dual-Mode Displ

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE