Text Us +1 773-430-6136
Description
The new NMX-DEC-N1222A-C provides the functionality of the NMX-DEC-N1222A in a card form factor for use with the NMX-ACC-N9206 2RU Rack Mount Cage, providing a clean rack mount solution for multiple encoders and decoders. Featuring improved digital pixel reproduction and latency reduction to an industry leading 10-ms for gigabit links. Packetized video streams not only remain visually lossless throughout distribution, they also arrive instantly.
Features
- Minimal Proprietary Compression Video Over IP Decoder with AES67 Support, Card
- Supports AES67 audio networking
- Video: Digital Video Input: Network video over Ethernet via RJ45 port or fiber via 1G SFP port Video Output: HDMI, DVI-D (through adapter) Formats: HDMI, DVI-D (through adapter), HDCP content protection support Output Resolutions: Supports most common HD up to 1920x1200. **720x480 @ 59Hz, 640x480 @ 60Hz, **720x480 @ 60Hz, **720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, **1280x720 @ 50Hz, **1280x720 @ 59Hz, **1280x720 @ 60Hz, 1360x768 @ 60Hz, 1366x768 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1152x864 @ 60Hz, 1600x900 @ 60Hz, 1440x900 @ 60Hz, 1280x960 @ 60Hz, 1280x1024 @ 60Hz, ***1600x1200 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 23Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, **1920x1080 @ 50Hz, **1920x1080 @ 59Hz, **1920x1080 @ 60Hz, **1920x1080i @ 50Hz, **1920x1080i @ 59Hz, **1920x1080i @ 60Hz, ***1920x1200 @ 60Hz **supported in component mode ***reduced blanking only
- Audio: Input Signal Types: Network video and audio over Ethernet via RJ45 (audio at 48-kHz, standard SVSI audio stream or AES67, user selectable) Output Signal Types: Embedded audio on DVI-D or HDMI (through adapter) HDMI Audio Formats: 8ch PCM Analog Audio Format: Stereo 2-channel Digital-to-Analog Conversation: 16-bit 32 kHz, 44.1 kHz and 48 kHz (matched to Encoder settings)
- Ports: +12V 2A: One 12 Volt DC power input P0: 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides the network connection, network AV video, and power to the Encoders and Decoders P1: 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port IR: 2-pin terminal Phoenix connector Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included) RS232: 3-pin terminal Phoenix connector Provides a serial control interface. Full duplex communication. Available terminal speed settings: 9600-115200 baud rate Audio: 5-pin terminal Phoenix connector Provides user-selectable balanced/unbalanced output. Dedicated audio output HDMI Out: HDMI video output
Why We Like This
This AMX networked AV product supports scalable IP-based video distribution, helping integrators build organized, high-performance signal transport systems.
FAQs
Q: What is the AMX NMX-DEC-N1222A-C Decoder Card?
A: The AMX NMX-DEC-N1222A-C Decoder Card is minimal proprietary compression video over ip decoder with aes67 support, card.
Q: What AMX FG number is listed for the NMX-DEC-N1222A-C Decoder Card?
A: FGN1222A-CD
Q: Is the AMX NMX-DEC-N1222A-C Decoder Card a standard availability item?
A: The source identifies this product as limited availability.
Q: What type of product is the AMX NMX-DEC-N1222A-C Decoder Card?
A: Minimal Proprietary Compression Video Over IP Decoder with AES67 Support, Card
Based in Chicago, IL, Gear Club Direct supports musicians, integrators, and creators every day with reliable gear and expert service.
Tech Specs
Audio: |
Input Signal Types: Network video and audio over Ethernet via RJ45 (audio at 48-kHz, standard SVSI audio stream or AES67, user selectable) Output Signal Types: Embedded audio on DVI-D or HDMI (through adapter) HDMI Audio Formats: 8ch PCM Analog Audio |
Brand: |
AMX |
Communications: |
Ethernet: P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP P1: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP |
Controls and Indicators - Front Panel: |
RESET Button: Recessed pushbutton Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings ID Button: Recessed pushbutton Press to send a notification out on the network to id |
Controls and Indicators - Rear Panel: |
PWR LED: Same as POWER LED described above HDMI LED: On (green) when there is a connection to a valid video source STAT LED: Same as STATUS LED described above STRM LED: On (green) when the unit is streaming video |
Environmental: |
Temperature: 32° to 104°F (0° to 40°C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: Up to ~44 BTU/hr |
FG Numbers: |
FGN1222A-CD |
General: |
Regulatory Compliance: FCC, CE, and NTRL Recommended Accessories: NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units |
Latency: |
Video Latency: 10 ms at 60 fps Audio Latency: standard SVSI audio stream = 17 ms(synced to video); AES67 = <1 ms adjustable to 17 ms Note: Video and audio latency values are the combined encode plus decode latency. Total latency from source to screen |
Manufacturer: |
AMX |
Model: |
NMX-DEC-N1222A-C Decoder Card |
Ports: |
+12V 2A: One 12 Volt DC power input P0: 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides the network connection, network AV video, and power to the Encoders and Decoders P1: 8-wire RJ45 female 1 |
Product Status: |
Limited Availability |
Product Type: |
Minimal Proprietary Compression Video Over IP Decoder with AES67 Support, Card |
Video: |
Digital Video Input: Network video over Ethernet via RJ45 port or fiber via 1G SFP port Video Output: HDMI, DVI-D (through adapter) Formats: HDMI, DVI-D (through adapter), HDCP content protection support Output Resolutions: Supports most common HD up |
Delivery & Returns
At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.
The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE
