Description

The ZonePRO 640m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.

The 640m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.

The 640m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmthåÂ, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.

A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.

The front panel of the 640m features comprehensive signal metering, an informative LCD display and user-specified front panel control.

Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.

All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).

ZonePRO Designeråãthe configuration, control and monitoring software for the ZonePRO family of devicesåãoffers control of the ZonePRO 640m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 640m.

Recommended for: Installed.

Features

6 Inputs / 4 Outputs
4 Balanced Mic/Line Inputs
2 Unbalanced, Mono-Summed RCA Input Pairs
Microphone Gain per Channel
Pre-Configured Architecture
Two Configurable Input Insert Positions
One Configurable Output Insert Position
AutoWarmthåÂ per Output Zone
Link Bus
Comprehensive Signal Metering
Front Panel LCD
User-Specified Front Panel Control
Optional ZC Controllers
Ethernet Control
Serial Control
Third Party Control
Wizard-Driven Configuration

Specifications

Indicators	4 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters
LCD Display	LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute
Input	6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs
Input Connectors	Euroblock (Line and Mic) RCA (Source)
Input Type	Electronically balanced/RF-filtered
Input Impedance	Euroblock: >50k_ Balanced, >25k_ Unbalanced, RF Filtered; RCA: >25k_ Unbalanced, RF Filtered
Max Input	+20dBu Mic/Line, +12dBu RCA
CMRR	>40dB, typically >55dB @ 1 kHz
Mic Preamp gain	30 to 60dB
Mic Preamp Equivalent Input Noise (EIN)	< -118dBu, 22Hz-22kHz, 150_ Source Impedance
Mic Preamp Phantom Power	+15VDC
Output	4 total
Output Connectors	Euroblock
Output Type	Electronically Balanced, RF Filtered
Output Impedance	120_ Balanced, 60_ Unbalanced
Max Output	+20dBu
A/D Converter	dbx Type IVåÈ conversion system
A/D Dynamic Range	(line) >113 dB, A-weighted, >110 dB unweighted
Type IV Dynamic Range	>119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW
Digital Output Dynamic Range	>114 dB A-weighted, 110dB unweighted
Sample Rate	48kHz
D/A Dynamic Range	112 dB A-weighted, 109dB unweighted, 22kHz BW
Dynamic Range	>109 dB A-weighted, >106 dB unweighted, 22kHz BW
THD+Noise	0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response	20Hz - 20kHz, +/-0.5dB
Interchannel Crosstalk	>80dB typical
Propagation Delay	0.6 msec
Operating Voltage	100VAC 50/60Hz, 120VAC 60Hz and 230VAC 50/60Hz
Power Consumption	29 W
BTU	<92.13
Unit Weight	6.05 lbs / 2.74 kg
Shipping Weight	8.2 lbs / 4 kg
Dimensions	1.75Ì¨ (1U) x 19Ì¨ x 7.75Ì¨ (45mm x 483mm x 197mm)
Safety Agency Certifications	UL 600065, IEC 60065, EN 55013, E60065

Tech Specs

$500 - $15,000 INSTANT APPROVAL / NO HARD CREDIT PULL:

Apply Now

Delivery & Returns

At Gear Club Direct, we want you to be happy with your purchase. We understand that there are times when once a product is received, it may not be what you needed or wanted after all. So, we will gladly accept your qualifying return within 15 days of the delivery date. After 15 days of the delivery date, all sales are final.

The Return Process
Customers are required to obtain a Pre-Authorization to return any product. To submit a request for a return, simply log in to your account and request a return and one of our sales representatives will contact you within 24-48 business hours. If you do not have an account with us, please open a help ticket, providing as much detail as possible and whether you are requesting a refund or an exchange. READ MORE