Microphone Accessories

The Shure A15AS Switchable In-Line Attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB. It is specially suited to reducing the level of a high-output microphone to prevent it from overloading the microphone...

Mounting flange facilitates flush-mounting of microphones onto platforms, like podiums and desktops.

Mounting flange facilitates flush-mounting of microphones onto platforms, like podiums and desktops.

Small mounting flange facilitates flush-mounting of microphones onto platforms, like podiums and desktops.

The Shure A120S In-Line On/Off Switch is an in-line, balanced, locking or momentary switch for a microphone. The A120S can be configured in several ways to meet different user requirements. Typical use cases include adding Latch On/Off, Push-To-Talk, or...

ProX X-FM7 Podium Microphone-Gooseneck Flange Mount 5/8-27 Thread 2.3 Inch Diameter This ProX X-FM7 Podium Microphone-Gooseneck is a convenient flange mount that works great for mounting mic clips or threaded goosenecks to flat surfaces. 5/8"...

Self-adhesive Hook and Loop Tape 50 mm in width - 1 m long. Ideal for mounting devices on pedal boards.

The PAN-05 enables you to patch two microphones into one single mixing desk channel in situations where you run out of channels. Since decoupling occurs via a balanced resistor network, the PAN-05 also lets phantom power “pass through”,...

Single space 8-channel rackmount microphone splitter   Transformer isolated and direct outputs   Channel pair link switches for doubling outputs or merging inputs   Individual ground lift on each channel   Suitable for...

Passive splitter box for microphone signals. One module has 4 channels. Each channel has an input, an output wired in parallel for passthrough of phantom power, and two splitter transformer-isolated outputs. All outputs are also decoupled via resistors.